> dmesg [ 0.000000] Linux version 3.2.34 (root@localhost.localdomain) (gcc version 4.6.4 20120731 (prerelease) (Linaro GCC branch-4.6.4. Marvell GCC 201211-1642.a7a01a7a) ) #1 Tue Jul 1 20:43:30 CST 2014 [ 0.000000] CPU: Marvell PJ4Bv7 Processor [561f5811] revision 1 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: Marvell Armada-370 [ 0.000000] Using UBoot passing parameters structure [ 0.000000] >>>>>>>Tag MAC xx:xx:xx:xx:xx:xx [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat 806c0084, node_mem_map 806f5000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130048 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=3,2048 initrd=0x12000000 rootfstype=ubifs [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 505548k/505548k available, 18740k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xa0800000 - 0xfa800000 (1440 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80666000 (6520 kB) [ 0.000000] .init : 0x80666000 - 0x80690000 ( 168 kB) [ 0.000000] .data : 0x80690000 - 0x806c15a0 ( 198 kB) [ 0.000000] .bss : 0x806c15c4 - 0x806f4b7c ( 206 kB) [ 0.000000] NR_IRQS:256 [ 0.000000] a370_time_init [ 0.000000] sched_clock: 32 bits at 600MHz, resolution 1ns, wraps every 7158ms [ 0.675519] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 0.765493] pid_max: default: 32768 minimum: 301 [ 0.765619] Mount-cache hash table entries: 512 [ 0.765873] CPU: Testing write buffer coherency: ok [ 0.766020] hw perfevents: no hardware support available [ 0.766493] devtmpfs: initialized [ 0.769513] NET: Registered protocol family 16 [ 0.771310] L0 cache Enabled [ 0.771322] Speculative Prefetch Disabled [ 0.771347] Aurora L2 Cache Enabled [ 0.771381] Support IO coherency. [ 0.771395] Enable DLB and DRAM write coalescing [ 0.772627] mvBoardSerdesModulesScan: srdsMode=1b, speed=1b [ 0.773793] [ 0.773798] CPU Interface [ 0.773803] ------------- [ 0.773808] SDRAM_CS0 ....base 00000000, size 512MB [ 0.773820] SDRAM_CS1 ....disable [ 0.773826] SDRAM_CS2 ....disable [ 0.773832] SDRAM_CS3 ....disable [ 0.773839] DEVICE_CS0 ....base f2000000, size 32MB [ 0.773851] DEVICE_CS1 ....no such [ 0.773866] DEVICE_CS2 ....no such [ 0.773881] DEVICE_CS3 ....no such [ 0.773896] PEX0_MEM ....base e0000000, size 32MB [ 0.773907] PEX0_IO ....base f1100000, size 1MB [ 0.773917] PEX1_MEM ....base e2000000, size 32MB [ 0.773928] PEX1_IO ....base f1200000, size 1MB [ 0.773939] INTER_REGS ....base d0000000, size 1MB [ 0.773949] DMA_UART ....no such [ 0.773964] SPI_CS0 ....base f0000000, size 16MB [ 0.773976] SPI_CS1 ....no such [ 0.773991] SPI_CS2 ....no such [ 0.774006] SPI_CS3 ....no such [ 0.774021] SPI_CS4 ....no such [ 0.774036] SPI_CS5 ....no such [ 0.774051] SPI_CS6 ....no such [ 0.774065] SPI_CS7 ....no such [ 0.774080] BOOT_ROM_CS ....no such [ 0.774095] DEV_BOOTCS ....base f5000000, size 16MB [ 0.774108] PMU_SCRATCHPAD ....no such [ 0.774123] CRYPT0_ENG ....base c8010000, size 64KB [ 0.774136] [ 0.774139] Shuttle Marvell Armada370 Platform-- OMNINAS-KD22 Soc: MV6707 A1 LE [ 0.774153] LSP version: linux-3.2.34-axp_a370-2012_Q4.1p5 [ 0.774160] [ 0.774162] [ 0.774170] Detected Tclk 200000000, SysClk 600000000, FabricClk 600000000 [ 0.775651] Marvel PHY ID1=141, ID2=dd1 [ 0.775658] Marvel PHY 88E1518 init... [ 0.781294] USB-dev=1 [ 0.781480] ..........USB ID=6707 [ 0.781535] Marvell USB EHCI Host controller #1: 9004aa00 [ 0.781655] USB-dev=0 [ 0.782834] ..........USB ID=6707 [ 0.782886] Marvell USB EHCI Host controller #0: 9004a800 [ 0.783086] ..........PEX ID=6707 [ 0.783095] mvPexInit: for PCIe0, type=ROOT_COMPLEX [ 0.784107] PEX0 interface detected Link X1 [ 0.784207] ..........PEX ID=6707 [ 0.784213] mvPexInit: for PCIe1, type=ROOT_COMPLEX [ 0.785221] PEX1 interface detected Link X1 [ 0.785445] pci 0000:00:01.0: [1b6f:7023] type 0 class 0x000c03 [ 0.785510] pci 0000:00:01.0: reg 10: [mem 0x40000000-0x40007fff 64bit] [ 0.785655] pci 0000:00:01.0: supports D1 D2 [ 0.785664] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot [ 0.785679] pci 0000:00:01.0: PME# disabled [ 0.785760] PCI: bus0: Fast back to back transfers disabled [ 0.786140] pci 0000:01:01.0: [10ec:8176] type 0 class 0x000280 [ 0.786178] pci 0000:01:01.0: reg 10: [io 0xffffff00-0xffffffff] [ 0.786223] pci 0000:01:01.0: reg 18: [mem 0x42000000-0x42003fff 64bit] [ 0.786329] pci 0000:01:01.0: supports D1 D2 [ 0.786338] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.786352] pci 0000:01:01.0: PME# disabled [ 0.786429] PCI: bus1: Fast back to back transfers disabled [ 0.786635] pci 0000:01:01.0: BAR 2: assigned [mem 0xe2000000-0xe2003fff 64bit] [ 0.786659] pci 0000:01:01.0: BAR 2: set to [mem 0xe2000000-0xe2003fff 64bit] (PCI address [0xe2000000-0xe2003fff]) [ 0.786673] pci 0000:01:01.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 0.786688] pci 0000:01:01.0: BAR 0: set to [io 0x100000-0x1000ff] (PCI address [0x100000-0x1000ff]) [ 0.786703] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe0007fff 64bit] [ 0.786723] pci 0000:00:01.0: BAR 0: set to [mem 0xe0000000-0xe0007fff 64bit] (PCI address [0xe0000000-0xe0007fff]) [ 0.786734] Aton-Buttons Device Load [ 0.799188] bio: create slab at 0 [ 0.799682] vgaarb: loaded [ 0.800123] SCSI subsystem initialized [ 0.800408] libata version 3.00 loaded. [ 0.800866] usbcore: registered new interface driver usbfs [ 0.801066] usbcore: registered new interface driver hub [ 0.801219] usbcore: registered new interface driver ethub [ 0.801351] usbcore: registered new device driver usb [ 0.802651] cfg80211: Calling CRDA to update world regulatory domain [ 0.803080] Switching to clocksource armada370_clocksource [ 0.804901] NET: Registered protocol family 2 [ 0.804999] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.805232] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.805435] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.805590] TCP: Hash tables configured (established 16384 bind 16384) [ 0.805600] TCP reno registered [ 0.805611] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.805630] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.805814] NET: Registered protocol family 1 [ 0.806005] RPC: Registered named UNIX socket transport module. [ 0.806015] RPC: Registered udp transport module. [ 0.806021] RPC: Registered tcp transport module. [ 0.806028] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.806109] PCI: CLS 32 bytes, default 32 [ 0.806241] Trying to unpack rootfs image as initramfs... [ 0.806716] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.820437] Freeing initrd memory: 2980K [ 0.820747] cesadev_init(8066dbe0) [ 0.821225] mvCesaInit: channels=1, session=640, queue=64 [ 0.826595] MV Buttons Driver Load [ 0.827015] Temp max = 98, Temp min = 10 [ 0.827023] Raw max = 179 [ 0.827028] Raw min = 301 [ 0.827190] Armada XP hwmon thermal sensor initialized. [ 0.827288] Initializing Armada-XP CPU power management (WFI) [ 0.887718] fuse init (API version 7.17) [ 0.888022] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.888380] msgmni has been set to 993 [ 0.889089] io scheduler noop registered [ 0.889098] io scheduler deadline registered [ 0.889149] io scheduler cfq registered (default) [ 0.889189] Initializing ths8200_init [ 0.889308] Initializing dove_adi9889_init [ 0.889440] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 0.889479] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 0.905485] mv_xor mv_xor.0: Marvell XOR: ( xor ) [ 0.925481] mv_xor mv_xor.1: Marvell XOR: ( xor ) [ 0.945480] mv_xor mv_xor.2: Marvell XOR: ( cpy ) [ 0.965479] mv_xor mv_xor.3: Marvell XOR: ( fill cpy ) [ 0.970544] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.971288] serial8250.0: ttyS0 at MMIO 0xd0012000 (irq = 41) is a 16550A [ 1.698236] console [ttyS0] enabled [ 1.702504] brd: module loaded [ 1.708825] loop: module loaded [ 1.712684] sata_mv sata_mv.0: version 1.28 [ 1.712842] sata_mv sata_mv.0: slots 32 ports 2 [ 1.719096] scsi0 : sata_mv [ 1.722307] scsi1 : sata_mv [ 1.725392] ata1: SATA max UDMA/133 irq 55 [ 1.729522] ata2: SATA max UDMA/133 irq 55 [ 1.745985] SPI Serial flash detected @ 0xf0000000, 1024KB (16sec x 64KB) [ 1.753948] armada-nand armada-nand.0: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC [ 1.765284] index=10, flash-id=f1ad [ 1.769866] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) [ 1.778532] Bad block table found at page 65472, version 0x01 [ 1.784577] Bad block table found at page 65408, version 0x01 [ 1.790725] Creating 3 MTD partitions on "armada-nand": [ 1.795982] 0x000000000000-0x000000800000 : "kernel" [ 1.801806] 0x000000800000-0x000000e00000 : "initrd" [ 1.807607] 0x000000e00000-0x000008000000 : "rootfs" [ 1.813634] mv_eth_probe: port_mask=0x1, cpu_mask=0x1 [ 1.818879] 0 - Base 0x00000000 , Size = 0x00000000. [ 1.823854] 4 - Base 0xf2000000 , Size = 0x00000000. [ 1.828834] 8 - Base 0xe0000000 , Size = 0x00000000. [ 1.833808] 9 - Base 0xf1100000 , Size = 0x00000000. [ 1.838788] 10 - Base 0xe2000000 , Size = 0x00000000. [ 1.843849] 11 - Base 0xf1200000 , Size = 0x00000000. [ 1.848915] 12 - Base 0xd0000000 , Size = 0x00000000. [ 1.853976] 14 - Base 0xf0000000 , Size = 0x00000000. [ 1.859041] 23 - Base 0xf5000000 , Size = 0x00000000. [ 1.864102] 25 - Base 0xc8010000 , Size = 0x00000000. [ 1.869172] mvBoardSerdesModeGet: serdesMode=1b [ 1.873716] o 1 Giga ports supported [ 1.877478] o SKB recycle supported (Enabled) [ 1.882016] o NETA acceleration mode 1 [ 1.885950] o RX Queue support: 1 Queues * 128 Descriptors [ 1.891620] o TX Queue support: 1 Queues * 532 Descriptors [ 1.897292] o GSO supported [ 1.900263] o GRO supported [ 1.903233] o Receive checksum offload supported [ 1.908035] o Transmit checksum offload supported [ 1.912921] o Driver ERROR statistics enabled [ 1.917463] [ 1.919043] o Loading network interface(s) [ 1.923328] [ 1.924821] o Port 0 is connected to Linux netdevice [ 1.930050] giga p=0: mtu=1500, mac=xxxxxxxx [ 1.938253] o eth0, ifindex = 2, GbE port = 0 [ 1.942982] [ 1.944886] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.951013] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.956656] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.963721] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.969606] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.975451] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.981520] sky2: driver version 1.30 [ 1.985319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.991909] ehci_marvell ehci_marvell.1: Marvell Orion EHCI [ 1.997556] ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 1 [ 2.035479] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbb51100 [ 2.055465] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00 [ 2.062343] hub 1-0:1.0: USB hub found [ 2.066130] hub 1-0:1.0: 1 port detected [ 2.070387] ehci_marvell ehci_marvell.0: Marvell Orion EHCI [ 2.076006] ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 2 [ 2.105478] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbb50100 [ 2.125464] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00 [ 2.132292] hub 2-0:1.0: USB hub found [ 2.136076] hub 2-0:1.0: 1 port detected [ 2.140775] usbcore: registered new interface driver usblp [ 2.146398] usbcore: registered new interface driver uas [ 2.151722] Initializing USB Mass Storage driver... [ 2.156783] usbcore: registered new interface driver usb-storage [ 2.162803] USB Mass Storage support registered. [ 2.167589] usbcore: registered new interface driver usbtest [ 2.173625] mousedev: PS/2 mouse device common for all mice [ 2.179329] i2c /dev entries driver [ 2.183430] rtc-pcf8563 0-0051: chip found, driver version 0.4.3 [ 2.193040] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 2.199771] rtc-pcf8563 0-0051: get date/time... [ 2.207653] Linux telephony interface: v1.00 [ 2.211940] md: linear personality registered for level -1 [ 2.217446] md: raid0 personality registered for level 0 [ 2.222769] md: raid1 personality registered for level 1 [ 2.228096] md: raid10 personality registered for level 10 [ 2.233930] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.242561] cpuidle: using governor ladder [ 2.246728] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 2.253314] cpuidle: using governor menu [ 2.257678] usbcore: registered new interface driver usbhid [ 2.263262] usbhid: USB HID core driver [ 2.267666] oprofile: no performance counters [ 2.272229] oprofile: using timer interrupt. [ 2.276604] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 2.284314] TCP cubic registered [ 2.287662] NET: Registered protocol family 10 [ 2.292521] IPv6 over IPv4 tunneling driver [ 2.297019] ata1.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133 [ 2.303217] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.310384] NET: Registered protocol family 17 [ 2.314932] 8021q: 802.1Q VLAN Support v1.8 [ 2.319154] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 2.328724] UBI: attaching mtd3 to ubi0 [ 2.332575] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 2.338879] UBI: logical eraseblock size: 126976 bytes [ 2.344288] UBI: smallest flash I/O unit: 2048 [ 2.349010] UBI: VID header offset: 2048 (aligned 2048) [ 2.355028] UBI: data offset: 4096 [ 2.375572] ata1.00: configured for UDMA/133 [ 2.380142] scsi 0:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC54 PQ: 0 ANSI: 5 [ 2.388374] usb 1-1: new high-speed USB device number 2 using ehci_marvell [ 2.396391] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 2.404161] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.409939] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.415773] sd 0:0:0:0: [sda] Write Protect is off [ 2.420583] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.420718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.471259] sda: sda1 sda2 sda3 sda4 [ 2.477348] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.550721] scsi2 : usb-storage 1-1:1.0 [ 2.686914] UBI: max. sequence number: 404 [ 2.696330] UBI: attached mtd3 to ubi0 [ 2.700090] UBI: MTD device name: "rootfs" [ 2.705152] UBI: MTD device size: 114 MiB [ 2.710143] UBI: number of good PEBs: 904 [ 2.714768] UBI: number of bad PEBs: 8 [ 2.719227] UBI: number of corrupted PEBs: 0 [ 2.723678] UBI: max. allowed volumes: 128 [ 2.728308] UBI: wear-leveling threshold: 4096 [ 2.733020] UBI: number of internal volumes: 1 [ 2.737475] UBI: number of user volumes: 1 [ 2.741926] UBI: available PEBs: 0 [ 2.746382] UBI: total number of reserved PEBs: 904 [ 2.751267] UBI: number of PEBs reserved for bad PEB handling: 9 [ 2.757290] UBI: max/mean erase counter: 5/3 [ 2.761567] UBI: image sequence number: 1435406797 [ 2.766543] UBI: background thread "ubi_bgt0d" started, PID 473 [ 2.773538] rtc-pcf8563 0-0051: setting system clock to 2014-09-04 11:30:33 UTC (1409830233) [ 2.925484] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 2.965503] ata2.00: ATA-8: HGST HMS5C4040BLE640, MPAOA5D0, max UDMA/133 [ 2.972220] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.035501] ata2.00: configured for UDMA/133 [ 3.040057] scsi 1:0:0:0: Direct-Access ATA HGST HMS5C4040BL MPAO PQ: 0 ANSI: 5 [ 3.048904] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 3.056684] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.062226] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.067735] sd 1:0:0:0: [sdb] Write Protect is off [ 3.072540] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.072603] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.116646] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.121676] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.126371] md: Waiting for all devices to be available before autodetect [ 3.133173] md: If you don't use raid, use raid=noautodetect [ 3.139411] md: Autodetecting RAID arrays. [ 3.168129] md: invalid raid superblock magic on sda1 [ 3.173194] md: sda1 does not have a valid v0.90 superblock, not importing! [ 3.189883] md: invalid raid superblock magic on sda3 [ 3.194947] md: sda3 does not have a valid v0.90 superblock, not importing! [ 3.228250] md: invalid raid superblock magic on sda4 [ 3.233314] md: sda4 does not have a valid v0.90 superblock, not importing! [ 3.275339] md: invalid raid superblock magic on sdb1 [ 3.280416] md: sdb1 does not have a valid v0.90 superblock, not importing! [ 3.295365] md: invalid raid superblock magic on sdb3 [ 3.300442] md: sdb3 does not have a valid v0.90 superblock, not importing! [ 3.334772] md: invalid raid superblock magic on sdb4 [ 3.339845] md: sdb4 does not have a valid v0.90 superblock, not importing! [ 3.346838] md: Scanned 6 and added 0 devices. [ 3.351288] md: autorun ... [ 3.354085] md: ... autorun DONE. [ 3.357522] RAMDISK: gzip image found at block 0 [ 3.547072] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9454 PQ: 0 ANSI: 0 [ 3.576172] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.582676] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 3.677950] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 3.747172] UBI: mtd3 is detached from ubi0 [ 3.757897] UBI: attaching mtd3 to ubi0 [ 3.761751] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 3.768064] UBI: logical eraseblock size: 126976 bytes [ 3.773472] UBI: smallest flash I/O unit: 2048 [ 3.778191] UBI: VID header offset: 2048 (aligned 2048) [ 3.784209] UBI: data offset: 4096 [ 4.150128] UBI: max. sequence number: 404 [ 4.165534] UBI: attached mtd3 to ubi0 [ 4.169297] UBI: MTD device name: "rootfs" [ 4.174357] UBI: MTD device size: 114 MiB [ 4.179340] UBI: number of good PEBs: 904 [ 4.183964] UBI: number of bad PEBs: 8 [ 4.188423] UBI: number of corrupted PEBs: 0 [ 4.192873] UBI: max. allowed volumes: 128 [ 4.197503] UBI: wear-leveling threshold: 4096 [ 4.202215] UBI: number of internal volumes: 1 [ 4.206670] UBI: number of user volumes: 1 [ 4.211121] UBI: available PEBs: 0 [ 4.215576] UBI: total number of reserved PEBs: 904 [ 4.220462] UBI: number of PEBs reserved for bad PEB handling: 9 [ 4.226485] UBI: max/mean erase counter: 5/3 [ 4.230762] UBI: image sequence number: 1435406797 [ 4.235670] UBI: background thread "ubi_bgt0d" started, PID 552 [ 4.372392] UBIFS: recovery needed [ 4.425772] UBIFS: recovery deferred [ 4.429368] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 4.435386] UBIFS: mounted read-only [ 4.438984] UBIFS: file system size: 111738880 bytes (109120 KiB, 106 MiB, 880 LEBs) [ 4.446937] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) [ 4.454261] UBIFS: media format: w4/r0 (latest is w4/r0) [ 4.460112] UBIFS: default compressor: lzo [ 4.464216] UBIFS: reserved for root: 0 bytes (0 KiB) [ 4.545356] UBIFS: un-mount UBI device 0, volume 0 [ 4.703692] md: md0 stopped. [ 4.709560] md: bind [ 4.715562] md: bind [ 4.730011] bio: create slab at 1 [ 4.737302] md/raid1:md0: active with 2 out of 2 mirrors [ 4.742711] md0: detected capacity change from 0 to 209702912 [ 5.805589] md0: unknown partition table [ 7.030435] UDF-fs: warning (device sda2): udf_fill_super: No partition found (1) [ 7.127157] UBIFS: recovery needed [ 7.183201] UBIFS: recovery completed [ 7.186894] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 7.192916] UBIFS: file system size: 111738880 bytes (109120 KiB, 106 MiB, 880 LEBs) [ 7.200858] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) [ 7.208187] UBIFS: media format: w4/r0 (latest is w4/r0) [ 7.214030] UBIFS: default compressor: lzo [ 7.218138] UBIFS: reserved for root: 0 bytes (0 KiB) [ 7.223947] VFS: Mounted root (ubifs filesystem) on device 0:13. [ 7.230270] Freeing init memory: 168K [ 0.726345] md: md3 stopped. [ 0.737216] md: bind [ 0.740235] md: bind [ 0.765056] md/raid1:md3: active with 2 out of 2 mirrors [ 0.770495] md3: detected capacity change from 0 to 1073729536 [ 1.255436] md3: unknown partition table [ 1.260000] Adding 1048560k swap on /dev/md3. Priority:-1 extents:1 across:1048560k [ 1.311779] eth0: mac address changed [ 3.327361] md: md1 stopped. [ 3.354298] md: bind [ 3.367536] md: bind [ 3.397267] md/raid1:md1: active with 2 out of 2 mirrors [ 3.402685] md1: detected capacity change from 0 to 3999379873792 [ 4.176049] md1: unknown partition table [ 10.126074] XFS (md1): Mounting Filesystem [ 10.931264] XFS (md1): Ending clean mount [ 12.000457] rtc-pcf8563 0-0051: enabled = 0... [ 12.004915] rtc-pcf8563 0-0051: Clear AF and AIE bits... [ 12.476582] RTL8192C/RTL8188C driver version 1.6 (2011-07-18/2012-03-26) [ 12.483394] =====>>INSIDE rtl8192cd_init_one <<===== [ 12.488787] PCI: enabling device 0000:01:01.0 (0146 -> 0147) [ 12.529119] correcting to 32 [ 12.533507] =====>>EXIT rtl8192cd_init_one <<===== [ 12.538340] =====>>INSIDE rtl8192cd_init_one <<===== [ 12.605845] =====>>EXIT rtl8192cd_init_one <<===== [ 12.610687] =====>>INSIDE rtl8192cd_init_one <<===== [ 12.691900] =====>>EXIT rtl8192cd_init_one <<===== [ 12.696710] =====>>INSIDE rtl8192cd_init_one <<===== [ 12.758726] =====>>EXIT rtl8192cd_init_one <<===== [ 12.763537] =====>>INSIDE rtl8192cd_init_one <<===== [ 12.821010] =====>>EXIT rtl8192cd_init_one <<===== [ 12.866330] pool #0: pkt_size=1536, buf_size=1632 - 256 of 256 buffers added [ 12.873530] eth0: link up [ 12.876173] eth0: started [ 12.967854] eth0: stopped [ 13.032012] eth1: link up [ 13.034663] eth1: started [ 13.077733] device eth1 entered promiscuous mode [ 13.183330] [PHY_ConfigMACWithParaFile][MACPHY_REG_92C] [ 13.525829] ===> Load_92C_Firmware [ 13.555049] <=== Load_92C_Firmware [ 14.299044] eth0: port 1(eth1) entering forwarding state [ 14.304383] eth0: port 1(eth1) entering forwarding state [ 11.088483] [PHY_ConfigMACWithParaFile][MACPHY_REG_92C] [ 11.430974] ===> Load_92C_Firmware [ 11.460195] <=== Load_92C_Firmware [ 11.702002] device wlan0 entered promiscuous mode [ 11.706812] eth0: port 2(wlan0) entering forwarding state [ 11.712267] eth0: port 2(wlan0) entering forwarding state [ 13.730209] udevd (2301): /proc/2301/oom_adj is deprecated, please use /proc/2301/oom_score_adj instead. [ 9.068465] etxhci_hcd_130321 0000:00:01.0: Etron xHCI Host Controller [ 9.075090] etxhci_hcd_130321 0000:00:01.0: new USB bus registered, assigned bus number 3 [ 9.092637] etxhci_hcd_130321 0000:00:01.0: irq 58, io mem 0xe0000000 [ 9.111205] xHCI etxhci_add_endpoint called for root hub [ 9.111220] xHCI etxhci_check_bandwidth called for root hub [ 9.116357] ethub 3-0:1.0: USB hub found [ 9.120319] ethub 3-0:1.0: 2 ports detected [ 9.161701] etxhci_hcd_130321 0000:00:01.0: Etron xHCI Host Controller [ 9.168306] etxhci_hcd_130321 0000:00:01.0: new USB bus registered, assigned bus number 4 [ 9.325359] xHCI etxhci_add_endpoint called for root hub [ 9.325373] xHCI etxhci_check_bandwidth called for root hub [ 9.334144] ethub 4-0:1.0: USB hub found [ 9.338104] ethub 4-0:1.0: 2 ports detected [ 10.580647] eth1: no IPv6 routers present [ 14.840628] wlan0: no IPv6 routers present [ 15.590628] eth0: port 1(eth1) entering forwarding state [ 19.590630] eth0: port 2(wlan0) entering forwarding state [ 29.188792] Extra Features Reg[0] = 0x60000100 [ 29.193294] Extra Features Reg[1] = 0x101a7 [ 29.197549] Control Reg = 0x10c5387d [ 29.201143] Main ID Reg = 0x561f5811 [ 29.204724] Cache Type Reg = 0x8003c003 [ 29.208592] L2 Control Reg = 0x1 [ 29.211845] L2 Auxilary Control Reg = 0x1a086302 [ 29.668040] Extra Features Reg[0] = 0x60000100 [ 29.672541] Extra Features Reg[1] = 0x101a7 [ 29.676801] Control Reg = 0x10c5387d [ 29.680383] Main ID Reg = 0x561f5811 [ 29.683976] Cache Type Reg = 0x8003c003 [ 29.687818] L2 Control Reg = 0x1 [ 29.691057] L2 Auxilary Control Reg = 0x1a086302 [ 30.062148] Extra Features Reg[0] = 0x60000100 [ 30.066605] Extra Features Reg[1] = 0x101a7 [ 30.070864] Control Reg = 0x10c5387d [ 30.074497] Main ID Reg = 0x561f5811 [ 30.078078] Cache Type Reg = 0x8003c003 [ 30.081931] L2 Control Reg = 0x1 [ 30.085222] L2 Auxilary Control Reg = 0x1a086302 [ 30.590372] Extra Features Reg[0] = 0x60000100 [ 30.594934] Extra Features Reg[1] = 0x101a7 [ 30.599125] Control Reg = 0x10c5387d [ 30.602725] Main ID Reg = 0x561f5811 [ 30.606363] Cache Type Reg = 0x8003c003 [ 30.610258] L2 Control Reg = 0x1 [ 30.613530] L2 Auxilary Control Reg = 0x1a086302